description about pull push rule
1. description about pull push rule
Answer:
A push pull rule is a measuring tape that coils into a compact case. It is used for measuring long, short, straight lengths.
2. Directions: Fill up the table with the necessary information.Description Tools or materialsThis is made of metal used for fastening.1. 2. LumberIt is a tool used to test the square-ness of a stock.3. 4. push – pull ruleIt is used to drive screws. 5
Answer:
1.stainless steel
2.for stuctural purposes
3.try square
4.measuring tape that coils into a compact case
5.srews
3. Directions: Fill up the table with the necessary information. Description Tools or materials This is made of metal used for fastening. 1. 2. Lumber It is a tool used to test the square-ness of a stock. 3. 4. push – pull rule It is used to drive screws. 5
Answer:
3.4.push rule it is used to drive screws.5
4. b. gouge b. screws b. try square SHOP TEACHER C. ASSESSMENT: MULTIPLE CHOICE: Read each item carefully and choose the answer that best describes the statement. Encircle the letter of your best answer. 1. A tool used to cut and shape wood. a. chisel 2. The easiest way to join two pieces of wood is by fastening them with c. iron smooth plane d. wood smooth plane a. nails 3. A kind of tool that is attached to the bench that holds lumber for easy working. c. bolts d. glue a. bench vise b. bench hook 4. Which of the following tools is used in measuring longer distances? c. clamp d. bench stop a. zigzag rule c. metal rule d. pull-push tape 5. It is commonly used for structural and furniture purposes a. lumber b. hardware accessories c. siding wood board d. floor board 6. Which of the following is the first procedure in requesting tools and materials? a. Fill in the classification of the project. b. List the unit of materials. c. State the name of the project. d. Write the number of available materials. 7. Why did you indicate your name in the requisition form? a. To avoid error in requisitioning. b. To complete the requisition form. c. To determine the person requesting it. d. To indicate the signature of the requisitioned. 8. Which of the following is NOT included in checking of the received materials and tools? a. amount b. condition c. length d. number of pieces 9. What gives the price of each material? a. amount b. description c. quantity d. cost 10. What will you do if any of the materials or tools is found missing or defective? You will... A Report it immediately to the supply officer. B. Report it immediately to the teacher. C. Hide the tools in the tool room. D. Never mind reporting it.
Answer:
nakakalito naman yung mga choices..kulang
5. I. Multiple Choice Directions:Write the letter of the correct answer on the blank. ______1.This is used by linemen to remove insulation of wire cables. a. pliers c. Electrician’s knife b. wire stripper d.Electric drill ______2. It is the path of electric current from the source to the components and goes back to the source. a.circuit c. diagram b.conduit/pipes d.electrical plan ______3.It is a span of flexible electrical power cable with a plug on one end and multiple sockets on the other end. a. convenience outlet c.circuit breaker b. extension cord d. fuse ______4. It is a pocket size tool used to test the line wire or circuit if there is current in it. a. switch c. voltmeter b. plugs d. test light ______5. It is a measuring tool used to measure the length of an object in centimeter and inches. a. pull-push rule c.micrometer b. wire gauge d. ammeter ______6.It is used in determining the size of wires/conductors. a. micrometer c. wire gauge b. ruler d. multi-tester ______7. It is a set of units which can be used to specify anything that can be measured. a. linear measurement c.foot rule b. system of measurement d. wire gauge ______8. The grade 7 learners were tasked to measure the length of their notebook in centimeters using their ruler. What system of measurement did the grade 7 learners used? a. English system c. scale b. ohmmeter d. metric system ______9.In inch graduation, the first graduation is _____. a. 1/16 c.3/16 b.18 d. ¼ ______10. Alecks wants to make sure that the electrical conduits are in its proper position. What electrical material does Alecks need? a. screw driver c.clamps b.connectors d. flat cord ______11. These are small drawings or pictograms used to represent various electrical devices. a. electrical plan c. circuits b. measuring tools and instruments d. electrical symbols ______12. This sign indicates that a person should observe extra awareness. a. safety alert c. prohibition b. warning d. danger ______13. It is a sketch of electrical circuit that shows the external appearance of each component. a. electrical plan c.pictorial diagram b. schematic diagram d. electrical drawing ______14. The grade 7 classroom has 4 lamps. When switched on, one light fails to light up yet the 3 other lamps remain. What type of circuit do the lamps show? a. series circuit c. parallel circuit b. electrical diagram d. connected circuit ______15. Convert the following: 12 inches = ______ cm a. 120 cm c.25.4 cm b. 254 cm d. 2. 54 cm II. Identify the following. Write MATERIAL for electrical materials and TOOLS for electrical tools. ____________16. Circuit breaker ____________17. Screw driver ____________18. Pliers ____________19.Convenience outlet ____________20. Wire Stripper III. Match the electrical symbols in Column A to their corresponding descriptions in Column B. Write the letter of the correct answer. A B ______21. a. Push button ______22. b. Switch ______23. c. Wires connected ______24. d. Incandescent lamp ______25. e. Battery
Answer:
1.A2B3A4D5A6A7A8B9C10-15A16-18C19-23A24-25B adunno huhuhuhuhu
6. Works MULTIPLE CHOICE Choose the letter of your best answer to the question. Encircle the letter of the correct answer 1. Implements manipulated by the hand to facilitate carpentry work a Tools Equipment Materials d. Hardware 2. What is a tool olen kept on a carpenter's tool bell? It is used to and make measurements. a. Mater Stick D. Ruler c. Caliper d. Pull-push rule 3. N is a thin cross laminated sheet of wood a Softwood b. Lumber c. Plywood d. Hardwood 4. Why is it important to use the correct adhesives on the materials they were intended for? a. Ensures a proper bond and no negative chemical reactions b. Ensure the colors match correctly c. Ensure the product does not off gas d. Ensures the person installing it does not get harmed 5. How do you describe a gravel a. fine and gritty materials b. a powdered substance C. coarse aggregate d. sandy materials 6. Which of the following is used for driving and pulling out nails a. Claw Hammer b. Crowbar c. Sledge hammer d. Hammerhead 7. This is an act of requiring something to be furnished; a written request for something authorized but not made available automatically a. Quantity b. Requisition c. Description d. Bill of Materials 8. When making a request for the materials and tools needed in your bulletin board project, a representative will come to approve your request. What is the name of the representative? a. Requisitioner b. Shop Teacher c. Supply officer d. Inspector 9. All are safety precautionary measures in handling newly acquired tools and materials, EXCEPT: a avold dropping the tools on the floor b. do not expose tools and materials to sunlight C. expose tools and materials to rain d. Clean after use 10. Why is it important to inspect and check materials and tools for defects and damage before receiving them? a. so that you can sell the item b. so that you can ask for payment c. So that you ask for a replacement d. so that you can keep the item 11. If you are requesting a standard sheet of plywood or sheet material , how big is it? a. 4x6 b. 4x8 c. 5x10 d. 5x5 12. How much would a 1 liter of stain maple cost at Php 140 per liter it you buy 3 liters? a Php 400 b. Php 420 c. Php 430 d. Php 440 13. This is setting aside materials and tools from the others a. Segregate b. Separate c. Aggregate d. Integrate 14. It is the accounting of tools and materials available in the shop room a. Inventory b. Gallery c. Display d. Shopping 15. What is used as guideline in repairing defective tools? a. Manual of Regulation b. Book Manual c. Repair Manual d. User Guide
Answer:
1.d. 6.a. 11.d
2.b 7.b. 12.c
3.a. 8.d. 13.b
4.d. 9.b. 14.a
5.c. 10.a. 15.b
Explanation:
I don't no or I'm wrong
but I'm correct☺☺
7. A. suggested project b. requisition unit c. material and description d. caliper e. pull-push rule f. metric system 37.lorenz wants to have 4 liters of pain for his suggested object. in what part of the requisition for is liter written? 38. Juana is planning to acquire material for her cabinet. in what part of the requisition form she will indicate this project. 39. madam Loring would like to establish a perimeter fence around her house with an area of 300 square meter. what system of measurement she uses based on meter? Pa help po
Answer:
hi sorry di ko po alam
Explanation:
salamat nalng po
8. a pull-push rule(b.claw hammerC.CTOSS cut sawd.ripsaw11.It is used for pulling out and driving nails.a plumb bobb.hack sawc.level bardclaw hammer12.A tool used for cutting across the grain of wood.a.claw hammerb.cross cut sawc.try squared hack saw13. A tool used in checking vertical and horizontal positiond.level bara plumb-bob b hacksawc. try square14. A fine toothed saw used to cut metals and pipes is calledb.cross cut sawc.hack sawd.try squarea ripsaw15. A tool used to test squareness of a stock.b.try squarec.level bard. claw hammera plumb bob16. It is a list of all things needed in a project together with their description sizes and amount or pa project planb.bill of materials c.project proposal d.purchased order17. Mila is planning to acquire materials for her cabinet. In what part of the requisition form does s
Answer:
salamat sa point haha ûwt
9. 3. Which is the best layout tool to use in marking a line on a floor that is to be ten meters (32' 10")? a. Cross-cut-saw c. Pull-push-rule b. Level bar d. Rip saw 4. What part of the requisition form will Nilo used for the having a paint brush on his proposed project? a. balance on hand c. requisition unit b. materials and description d. total 5. Which is the first step in accomplishing the requisition form? a. List the unit of materials to be requisitioned b. List the cost per unit and the total cost of each material. c. State the name of the project and date when you requested for materials d. Write the number of required materials. 6. Which of the following is used to protect the hands while working? a. claw hammer c. gloves b. face mask d. screwdriver 7. Which of the following is used in squaring, measuring, and testing the squareness of a wood? a, cabinet scraper c. steel square b. spirit level d. try square 8. Which type of maintenance is not directly included in the total maintenance costs, but migh of the overall total cost? a. breakdown c. prescriptive b. predictive d. preventive
Answer:
3.d
4.b
5.c
6.c
7.d
8.c
Explanation:
sana makatulong po
10. 1.What tools Mr. Sato must use when he wants to get the measurement of his lumber? A. Boring ToolsB.. Cutting ToolsC. Driving ToolsD. Measuring Tools2.Which of the following is NOT considered as a measuring tool? A.. ChiselB. Metal RuleC. Meter StickD. Wooden Rule3.If he wants to ensure a profitable business, what characteristic will he maintain? A. CommitmentB. FuturisticC. Goal-orientedD. Profit Oriented4.A statement of payment due to goods and services. *A. receiptC. requisitionB billD. acquisition5.John is the supplier officer of ABC Marketing. One morning, while counting the purchased items, he found out that the supplies and materials are only 14 pieces. But It was stated in the receipt that items should be 20 pieces. How many more pcs. Of the items are lacking? *A. 12 piecesB. 20 pieces D 14 piecesD. 14 piecesC. 6 pieces6.What is the needed action does John needs to complete his requested materials? *A. buy another lack itemsB. fill up requisition formC. do not accept all of itemsD contact vendor if problem with order7.It indicates the specifications of the material. *D. equipmentA. descriptionB. toolsC. materials8.If he wants to test the perfect square of a stock of wood, what tool he must use? *A. Metal RuleB. Push-pull RuleC. Try SquareD. Wooden Rule9.Mr. Sato has a different length of wood, some are long and some are very short. What measuring tool he must use to measure a long length wood? *A. Metal RuleB. Push-pull RuleC. Try SquareD. Wooden Rule10.When parts are not seen are represented by series of light dash lines then this line is classified as *A.Section lineB.Visible lineC.Reference lineD.Invisible line11.This line is used to cut through the object to see the interior A A.part of an object. *B.Object lineC.Phantom lineD.Leader lineE.Cutting plane line12.Mr. Cinco follows the advice of a friend to be flexible especially if he intends to open a furniture and sash factory business. What PECs has been demonstrated by Mr. Cinco? *A. Open to feedbackB. PersistentC. ReliableD. Self-ConfidenceIt Indicates specifications of materials in the requisition form *C. total costD. quantityA. description of toolsB. costThese are the non-consumable items used in the process. These are mostly carried and manipulated by hand. *A. ToolsB. MaterialsC. EquipmentD. HardwareHow would you determine if you want to find the number of needed materials in requisition form? *C. total costD quantityA. description of toolsB. costThese lines are used to indicate the measurement of objects. *Dimension linesLeader linesCenter linesExtension linesThese are the items that are being consumed and run out while being used in the process. *A. ToolsB. MaterialsC. EquipmentD. HardwareThe fine line used to show clearly the dimension limits are called *Extension lineDimension linePhantom lineCenter lineNow the he already measured the long length wood, Mr. Sato is now to measure the short ones. What tool should he use? *A. Metal RuleB. Push-pull RuleC. Try SquareD. Wooden RuleWhat PECs must he possess if there are customers who complain about the quality of his product? *HardworkingB. PatienceC. TrustworthyD. VersatileMade of metal used for fastening woods. *A. HammerB. NailC. Push-pull ruleD. SawTool used to cut objects. *A. HammerC. Push-pull ruleB. NailD. SawHe tells his best friend that he has strong will and does not give up finding a solution to a business problem. What PEC has been demonstrated by Mr. Cinco? *A. Hard workB. PersistenceC. Risk TakingD. Self-confidenceWhich of the following is NOT considered as a characteristic of an entrepreneur? *A. Copes with failureB. DependentC. Opportunity SeekerD. PersistentTool used to measure dimensions of an object. *B. NailD. SawA. HammerC. Push-pull ruleHow would you know how much the total price of an item in requisition and bill of materials? *B. costD. quantityC. total costA. description of toolsWhat forms you must fill up in order you to request tools and materials? *B. application formC. bill out formD. receipt formA. requisition formThis kind of documentation is needed to fill up after you received the item? *A requisition formB. receiving documentationC. bill of materialsD purchase requisitionWhy is it that requisition form is very important in business? *A. to know the effort of employeeB. to control the flow of needed materialsC. use to assess the departmentD. use to repair an itemThe vendor delivers material to the company what is the first thing you must do before receiving the goods? *B sign delivery receipt immediatelyD transact receiptC. inspect first the materialsA. do not inspect the materials
Answer:
1.b
2.d
3.b
4.a
5.a
6.c
7.d
8.a
11. 1. Which is used to allow the building views to be drawn on a smaller paper?a. measuring tapec. rulerb. pencild. scale2. Which carpenter's tool is used to drive and pull nails?a. claw hammerc. sawhorseb. rubber hammerd. tack hammer3. Which is the best layout tool to use in marking a line on a floor that is to be ten meters (32' 10")?a. Cross-cut-sawc. Pull-push-ruleb. Level bard. Rip saw4. What part of the requisition form will Nilo used for the having a paint brush on his proposed project?a. balance on handc. requisition unitb. materials and descriptiond. total5. Which is the first step in accomplishing the requisition form?a. List the unit of materials to be requisitionedb. List the cost per unit and the total cost of each material.c. State the name of the project and date when you requested for materialsd. Write the number of required materials.6. Which of the following is used to protect the hands while working?a. claw hammerc. glovesd. screwdriverb. face mask7. Which of the following is used in squaring, measuring, and testing the squareness of a wood?a. cabinet scraperc. steel squareb. spirit leveld. try square3. Which type of maintenance is not directly included in the total maintenance costs, but might be a componentof the overall total cost?a. breakdownc. prescriptiveb. predictived. preventive
Answer:
1.B
2.A
3.A
4.A
5.C
6.C
7.C
3.A
Explanation:
kindly correct me if I'm wrong
hope it's helpful
1.A. measuring tape
2.A.claw hammer
3.A. Cross-cut-saw
4.B. materials and description
5.C. State the name of the project and date when you requested for materials
6.C.gloves
12. Match the tools (1–5) with the descriptions (a–e). _____1. claw hammer _____2. hand saw _____3. plane _____4. chisel _____ 5. pull push rule----------------------------------------------a. used to cut into the angle of a dovetailb. used for cutting timberc. used for driving nails into timber d. used for smoothing rough woode. used for measuring long distances
Answer:
1.C
2.B
3.A
4.D
5.E
i Hope nakatulog ako sainyo :)
13. Learning task 1. Based on what you've learned about the lesson. List down and describe at least five (5) tools and materials that can be found at home. Write your answer on a clean piece of paper. Material/tool Uses and Description Answer MATERIALS/TOOLS / USES AND DESCRIPTION claw hammer - a tool used for driving and pulling out nails hand saw- a tool used for cutting and ripping woodpull-push rule - a tool used for measuring short and long distancesscrews - metals that has thread used as fastener pencil - a tool used for marking line and measurementtake care.
Answer:
ok po Sige oo oum yes ha ah ok Sige
14. 1. Which of the following is holding tool?a. hacksawb. pipe cutterc. pipe wrenchd.cross-cut saw2. Which of the following is a testing tool?a. L- square b. push-pull rule c. try-square d. plumb bob3. Which of the following is a holding tool?a. adjustable wrench b. sledge hammer c. crowbard. screwdriver4. Which of the following is a driving tool?a. horse levelb. drill pressc. spirit leveld. plumb bob5. Which of the following is a driving tool?a. adjustable wrench b. pipe wrench c. clampd. claw hammer6. What do you call the specification of matcrials that is requested fora. name of projectb. unit pricec. material descriptiond. borrower7. What do you call the task in which the materials and tools will be used?a. name of projectb. unit price c. material descriptiond. borrower8. What do you call the price of the material per piece or per unit?a. name of project b. unit pricec. balance on hand d. borrower9. What is the term that specifies the quantity and unit of materials that are still available in the stockroom?a. name of projectb. unit price c. balance on handd. borrower 10. This is the name and signature of the person making a request.a. name of projectb. unit price c. balance on hand d. borrower
Answer:
1 -pipe cutter??
Explanation:
correct me if im wrong
